Master of Science

Professional Master

1st Year

2nd Year

3rd Year

4th Year

Miscellaneous

## Site news

Skip available courses

## Available courses

Analog Integrated Circuits for graduate students

This course is offered for Graduate Students in Electronics and Communications Engineering Department. It covers circuit design concepts of linear regulators and switching regulators.

This course is offered for Master Students in Electronics and Communications Engineering Department. It covers fundamentals and concepts in Data converter architectures and design.

### ELC623: Digital Communications

- Teacher: Samy Soliman
- Teacher: Ahmed MEHANA

This is a fundamental graduate-level course on the analysis and the design of digital communication systems based on probability theory and signal space representation. It is intended to study the performance of various detection methods for communication systems operating over AWGN channels as well as fading channels. The course includes comparisons of different modulation techniques in terms of performance and resource usage. It covers also the design of equalizers. The course provides also introductions to MIMO systems, cooperative systems and multi-user systems.

This course introduces graduate students to the finite-difference techniques as applied to electromagnetic problems.

This course introduces numerical methods in Computational Electromagnetics, with emphasis on the Momemt Method (MoM) and the Finite-Difference (FD) Method. The course covers the EFIE, MFIE, and CFIE in the MoM as well as the application of the FD to quasi-electrostatic problems.

M.Sc Course (Computer Electronics and Communications)

The course covers the following topics:

Security Concepts and Definitions (Risks, Threats, Security Policy, Safeguards, Services) - Four Layer Security Model - Symmetric Key Cryptographic Techniques - Key Management Techniques for Symmetric Key Cryptography - Asymmetric Key Cryptographic Techniques - Digital Signature - Key Management Techniques for Asymmetric Key Cryptography - PKI – Practical Security Protocols - Security in Mobile Networks – Security in Wireless Networks.

The course aims at introducing the fundamental know-how of Digital System Testing and Testable Design. The tentative course outline covers using Verilog HDL for Design and Test, Fault and Defect Models, Test Pattern Generation, Design for Testability, Standard IEEE Test Access Methods, Built-in Self-test, and Test Compression.

This course studies the propagation of electromagnetic waves in periodic structures, starting with one-dimensional structures, i.e., transmission lines and passing by periodically loaded waveguides, electromagnetic bandgap structures, frequency-selective surfaces... etc. Periodic loading of surfaces to achieve certain characteristics is also investigated. In all problems, the analysis methods yielding the dispersion behavior are illustrated and the use of circuit and full-wave simulators are presented.

This course is designed to provide the foundation for graduate research in electromagnetics. It covers the electromagnetic theorems and principles, the Green's function method, with applications to the analysis of arbitrarily-shaped scatterers using the surface integral equation formulation. Canonical scattering problems, analysis of frequency selective surfaces and other topics are also covered.

The course presents topics relevant to computer and communication systems perfromance evaluation. These topics include Markov chain, Markov reward models, phase type distribution, complex analysis for PH distributions, and system simulation.

Lectures: Tuesdays 5:15PM - 8:00PM

Office Hours: Sundays 2PM-3PM

### Multimedia Communications

- Teacher: Omar Nasr

### ECP601: Digital Communications

- Teacher: Ahmed MEHANA
- Teacher: Omar Nasr

### ELC102B: Circuits I (B)

- Teacher: Heba Sadek

Review on Vector Analysis for Field Theory, Static Electric Fields, Electric Potential, Electric Permittivity, Capacitance, Electric Energy and Force, Poisson's and Laplace's Equations, Steady Electric Currents, Equation of Continuity, Static Magnetic Fields, Magnetic Vector Potential, Magnetic Field Intensity, Magnetic Permeability, Inductance, Magnetic Energy and Force

Frequency response

Oscillators

Feedback

OpAmp Applications

### ELC203: Computer

- Teacher: Ahmed Zahran

This courses introduces the student to the basic architecture of computer microprocessors and their programming using Assembly language.

Review on Vector Analysis for Field Theory, Static Electric Fields, Electric Potential, Electric Permittivity, Capacitance, Electric Energy and Force, Poisson's and Laplace's Equations, Steady Electric Currents, Equation of Continuity, Static Magnetic Fields, Magnetic Vector Potential, Magnetic Field Intensity, Magnetic Permeability, Inductance, Magnetic Energy and Force

Course Objectives:

- To be able to design a differential pair, current mirror, and power amplifiers.
- To analyze a two-stage amplifier.
- To have the knowledge of Noise analysis of an analog circuit.
- To be familiar with IC fabrication process.

This course introduces students who have only the knowledge of essential basic theorems and tools of circuits to new subjects of analysis of passive electric circuits such as frequency domain and spectrum analysis, transient and steady-state solutions of circuits with initial conditions as well as the subject of network synthesis.

### ELC206: Signals

- Teacher: Omar Nasr

### Humanities

- Teacher: Omar Nasr

The course has two main goals: 1) developing the personality of the students through ethics and softskills, and 2) teach the students the basic concepts of economics

### Electromagnitics I

- Teacher: Mona Fouad

Transmission Line (TL) Fundamentals - Smith Chart - Scattering Matrix

Analog IC applications - Operational amplifiers - Waveform generation - Multiviberator - Differential Amplifier - Gilbert Cell - Digital logic circuits (TTL, RTL, ECL) - Sequential circuits (flip flops, shift registers, counters) - Electronic circuits in radio and television - Phase locked loops - Video recording and CDs - Electronic systems in communication networking.

### ELC305A: EM Waves 1a

- Instructor: Islam Eshrah

This course introduces students to microwave engineering starting with transmission line theory, transmission line circuits, Smith charts, and matching techniques, and ending with microwave network analysis using S parameters.

### ELC302B: Active Circuits

- Teacher: Omar Mohamed
- Teacher: Mohamed Aboudina
- Teacher: Ahmed Khorshid

This course covers principles of active circuits.

### ELC303B: Computer 3 - Data Structures

- Teacher: Khaled Elsayed
- Teacher: Shehab Elsayed
- Teacher: Ahmed Zahran
- Teacher: Muhammad Refaat

### ELC305B: EM Waves 1b

- Teacher: Islam Eshrah

This course introduces students to microwave filter design, with focus on the insertion loss method. Different realization techniques are presented. Conducting waveguides supporting non-TEM modes are studied, such as rectangular and circular waveguides. Cavity resonators, excitation techniques and other topics are also covered.

### ELC480: USRP

- Teacher: Osama Riad
- Teacher: Sameh Yassin

Antenna fundamentals, basic antenna parameters, radiation integrals, radiation from wire antennas, aperture antennas, antenna arrays, phased arrays and null steering, receiving antennas, polarization mismatch, antenna design techniques

### ELC401A: Electronics 4A - Advanced Microelectronics

- Teacher: Ahmed Emira
- Teacher: Mohamed Aboudina
- Teacher: Ahmed Khorshid

This course is offered to 4th year students, Electronics and Communications Engineering. The course is covering different topics: Memories, CMOS opamp design, switched-capacitor circuits.

### ELC403A: Computer 4 (A) - Computer Networks

- Instructor: Khaled Elsayed
- Instructor: Mahmoud EL-HADIDI

This course aims at introducing the students to the basic concepts of Computer Networks and laying the foundation for more advanced courses in this very important area. It begins with an overview of computer networks, their functions, their types, and the main requirements for two computers to be able to communicate over a network. Subsequent topics include: The Way Networks Work, The Internet, Transport Layers Protocols, and Local Area Networks.

**Part I: Antenna Engineering**This course introduces students to antennas starting with the classical theory of radiation, the radiation mechanism, radiation integrals, antenna parameters, antenna types, receiving antennas, antenna arrays and ending with atmospheric wave propagation.

**Part II: Optical Engineering**This part is a brief introduction to lasers. Basic terms such as population inversion and stimulated emission are defined. Basic operation of a 3-level laser is presented.

- Communication 4th year

Advanced Communication Systems

This course introduces the advanced communication systems such as DSL, OFDM, Spread Spectrum and CDMA. ### ELC407A: Control 2 (A)

- Teacher: Hany El-Sayed

This course introduces students to the different scenarios of exposure to RF radiation, the relevant quantities used to assess it, and the related standards.

This course is intended for senior year students.

### ELC467: RF Electronics

- Teacher: Faisal Hussien

Standards Overview

RF system design

LNA

Mixer

PA

Oscillators

Frequency Synthesizer

This is a senior year undergraduate course on wireless communications. The course includes introduction to wireless communication systems, the characteristics of wireless channels and their limitations. It includes also introduction to spread spectrum (SS) communication systems, orthogonal-frequency division Multiplexing (OFDM) systems, as well as diversity systems in wireless communications.

### ELCN305: EM2

- Teacher: Islam Eshrah

This course covers transmission line components, microwave network analysis, microwave passive components based on microstrip lines. Analysis of non-TEM guided-wave structures like rectangular and circular waveguides is introduced. Excitation mechanisms, waveguide components and discontinuities are also covered.

# Course Contents

- Introduction: Overview, Static Fields Produced by Electrons
- Influence of Magnetic Field on Electron Motion
- Electron Cathode
- Electron Gun and Electron Beam
- Beam Gap Interaction and Bunching
- Klystron
- Traveling Wave Tubes TWT
- Crossed Field Devices (Magnetron)
- Gyrotron

## References:

- (Main Reference) A. S. Gilmour Jr., Klystrons, Traveling Wave Tubes, Magnetrons, Cross-Field Amplifiers, and Gyrotrons, 1st ed. Artech House, 2011.
- J. Benford, J. A. Swegle, and E. Schamiloglu, High power microwaves, Taylor & Francis, 2007.

### Elecromagnetics 1 (CHS)

- Instructor: Hanna Kirolous

Time varying fields and Maxwell’s equations, boundary conditions at different media interface, retarded potentials, plane wave propagation in free space, plane waves in lossy media, wave polarization, Poynting vector, Phase and group velocities, reflection and transmission of plane waves, critical and Brewster angles, TEM transmission line, transmission line equivalent circuit, transmission line circuit theory, impedance matching, Smith chart.

### ELCN112: Circuits II

- Teacher: Islam Eshrah

An advanced course in theory of electric circuits introducing resonance in electric circuits, filters, analysis of circuits using Fourier series, transient analysis using Laplace transform, and two-port networks.

### ELCN426: Optical Fibers (CHS)

- Instructor: Hanna Kirolous

Optical versus radio frequency communications – Optical fibers – Ray representation in optical fibers – Modal analysis in step and graded index optical fibers – Signal degradation – Optical receivers – Optical properties of III – V semiconductors – Photo emitters: SC laser diodes, light emitting diodes – Photo detectors: PIN and avalanche photo diode (APD).

**Course Objectives**- To introduce the detrimental effect of noise and ISI in digital communications systems.
- To introduce the concept of matched filtering and illustrate its importance in the digital communications receivers design.
- To illustrate the method for error rate calculation due to presence of noise.
- To explain the Nyquist criterion for pulse shaping for zero ISI.
- To explain the signal-space concept and introduce the Gram-Schmidt Orthogonalization procedure.
- To understand the concept of the likelihood function, the MAP and the ML decision rules.
- To introduce the union bound as a tool for error rate calculation.
- To introduce the different passband digital communications schemes: ASK, PSK and FSK and their performance.

### ELC N441: Elective Electronics 2

- Teacher: Faisal Hussien
- Teacher: Mohamed Aboudina

Elective Course - Advanced Electronics 2

### EECE Faculty Forum

- Coordinator: Mahmoud Ismail
- Coordinator: Islam Eshrah

EECE Faculty Forum is intended to be the venue for sharing posts (academic, political ... etc.), sharing files, posting announcements, sharing calendars and more.